Dell PowerEdge M620 Owner's Manual page 102

1 link indicator (16)
3 status/identification indicator
5 activity indicator (16)
NOTE:
Connectors on the Ethernet pass-through module correspond directly to the
blade number. For example, blade 5 is connected to port 5 on the Ethernet pass-
through module. Integrated network adapter 1 maps to I/O slot A1. Integrated
network adapter 2 maps to I/O slot A2.
Table 1-25. Ethernet Pass-through Module Indicators
Indicator Type
Link
indicator/activity
indicator
Power indicator
Status/
identification
indicator
NOTE:
Ethernet media speed is configured through the blade LOM firmware or by the
operating system. Speed and duplex settings are not configured through the pass-
through module itself.
102
About Your System
Pattern Description
Green on, The Ethernet connector is linked to the blade and
amber there is network activity.
blinking
Green on, The Ethernet connector is linked to the blade and
amber off there is no network activity.
Green off, The Ethernet connector is not linked to the blade
amber and there is network activity.
blinking
Green The Ethernet connector is not linked to the blade
off/amber off and there is no network activity.
Off Power to the module is off.
Green Module has power.
Blue on Active module.
Amber Fault condition in module.
flashing
2 RJ45 Ethernet connector (16)
4 power indicator