Entering The Uefi Boot Manager; Uefi Boot Manager Screen; Uefi Boot Settings Screen - Dell PowerEdge M620 Owner's Manual

Entering the UEFI Boot Manager

1 Turn on or restart your system.
2 Press <F11> after you see the following message:
<F11> = UEFI Boot Manager
NOTE:
NOTE:
the UEFI Boot Manager.
If your operating system begins to load before you press <F11>, allow the
system to finish booting, and then restart your system and try again.

UEFI Boot Manager Screen

Option
Continue
<Boot options>
UEFI Boot Settings
System Utilities

UEFI Boot Settings Screen

Option
Add Boot Option
Delete Boot Option
Enable/Disable Boot
Option
Change Boot Option
One-Time Boot From File
150
Using the System Setup Program and UEFI Boot Manager
The system does not respond until the USB keyboard is active.
The Boot Mode option in System Setup must be set to UEFI to access
Description
Selecting this option executes the current boot options
in listed order.
The list of current boot options is displayed, with an
asterisk. Select the boot option you wish to use and
press <Enter>.
Enables you to add, delete, enable, disable, and change
boot options, or execute a one-time boot option.
Enables you to access the legacy System Setup program,
System Services, and BIOS-level boot options.
Description
Adds a new boot option.
Deletes an existing boot option.
Disables and enables a boot option in the boot option
list.
Changes the order of the boot option list.
Sets a one-time boot option not included in the boot
option list.