Warning Messages - Dell PowerEdge M620 Owner's Manual

Table 1-27. Blade Messages
Message
Warning: The
current memory
configuration is
not optimal. For
more information
on valid memory
configurations,
please see the
Hardware Owner'
Manual on the
technical support
site.
Unexpected
interrupt in
protected mode
Write fault.
Write fault on
selected drive.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
Glossary at support.dell.com/manuals.

Warning Messages

A warning message alerts you to a possible problem and prompts you to
respond before the system continues a task. For example, before you format a
diskette, a message warns you that you may lose all data on the diskette.
Warning messages usually interrupt the task and require you to respond by
typing y (yes) or n (no).
134
About Your System
(continued)
Causes
There is no memory
configuration error, but
the memory configuration
is not recommended by
Dell.
Improperly seated DIMMs
or faulty keyboard/mouse
controller chip.
Faulty diskette, diskette
drive, or optical drive.
Corrective Actions
See "System Memory" on
page 171.
Reseat the memory
modules. See
"Troubleshooting Blade
Memory" on page 319. If the
problem persists, see
"Getting Help" on page 361
Replace the diskette. Ensure
that the drive cable is
properly connected. See
"Troubleshooting USB
Devices" on page 312 or
"Troubleshooting Hard
Drives" on page 320 for the
appropriate drive(s)
installed in your system.