System Utilities Screen; System And Setup Password Features; Using The System Password - Dell PowerEdge M620 Owner's Manual

System Utilities Screen

Option
System Setup
System Services
BIOS Boot Manager
Reboot System

System and Setup Password Features

Your system is shipped without the system password feature enabled. Operate
the system only with system password protection.
NOTE:
The password features provide a basic level of security for the data on your
system.
NOTE:
Anyone can access the data stored on your system if the system is running
and unattended.

Using the System Password

When a system password is assigned, the system prompts for the system
password after the system starts and only those with the password have full
use of the system.
Assigning a System Password
Before assigning a system password, enter the System Setup program and
check the System Password option.
When a system password is assigned, System Password is Enabled. If
Password Status is Unlocked, you can change the system password. If Locked,
you cannot change the system password. Disabling the password jumper on
the system board sets System Password to Disabled, and you cannot change
or enter a new system password.
Description
Accesses the System Setup program without rebooting.
Restarts the system and accesses the Unified Server
Configurator, which allows you to run utilities such as
system diagnostics. For more information, see the
Unified Server Configurator User's Guide.
Accesses the BIOS-level boot options list without
rebooting.
Restarts the system.
Using the System Setup Program and UEFI Boot Manager
151