Dell PowerEdge M620 Owner's Manual page 107

Table 1-26. LCD Status Messages
Code Text
E141F CPU #
protocol
error. Power
cycle AC.
E1420 CPU Bus
parity error.
Power cycle
AC.
E1422 CPU # machine
check error.
Power cycle
AC.
E1610 Power Supply
# (### W)
missing.
Check power
supply.
E1614 Power Supply
# (### W)
error. Check
power supply.
(continued)
Cause
The system BIOS has
reported a processor
protocol error.
The system BIOS has
reported a processor bus
parity error.
The system BIOS has
reported a machine check
error.
Specified power supply was
removed or is missing from
the system.
Specified power supply has
failed.
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 361.
Remove AC power to the
system for 10 seconds or
clear the SEL.
If the problem persists,
see "Getting Help" on
page 361.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 361.
See "Troubleshooting
Power Supply Modules"
on page 314.
See "Troubleshooting
Power Supply Modules"
on page 314.
About Your System
107