Rackmount Installation; Tabletop Or Shelf Installation - Enterasys 2200 Installation & User Manual

Installing the Device
Figure 3-1 Tabletop or Shelf Installation
3.3.2

Rackmount Installation

To install the 2H258-17R in a 19-inch rack, Enterasys Networks includes a strain-relief bracket for
cable management and an accessory kit containing the rackmount brackets, and mounting screws
to attach the rackmount brackets and strain-relief bracket.
Guidelines for the Rackmount Installation
The installation site must be within reach of the network cabling and meet the requirements listed
below:
• An appropriate grounded power receptacle must be located within seven feet of the location.
• Maintain a temperature of between 5°C (41°F) and 40°C (104°F) at the installation site with
fluctuations of less than 10°C (18°F) per hour.
CAUTION: To ensure proper ventilation and prevent overheating, leave a minimum
clearance space of 5.1 cm (2.0 in) at the left, right, and rear of the 2H258-17R.
WARNING: Before installing the 2H258-17R into a rack, ensure that the rack supports
the device(s) without compromising the stability of the rack. Otherwise, personal injury
and/or equipment damage may result.
3-4 Installation