Attaching The Rackmount Brackets - Enterasys 2200 Installation & User Manual

Installing the Device
Rack Mounting the 2H258-17R
Proceed as follows to install the 2H258-17R into a 19-inch rack:
1. There are several mounting holes in the rackmount brackets and the bottom of the chassis so that
each mounting bracket may be adjusted forward or backward to mount the device further into,
or out of the rack, depending on the installation requirements. Position the rackmount brackets
over the appropriate holes.
2. Locate the four 6-32 x 1/4-inch flathead screws in the rackmount kit. Use these screws to attach
the rackmount brackets to the bottom of the 2H258-17R as shown in
Figure 3-3 Attaching the Rackmount Brackets
3. With the mounting brackets attached, position the 2H258-17R between the vertical frame
members of the 19-inch rack and fasten it securely with mounting screws as shown in
Figure 3-4.
3-6 Installation
Figure 3-3.