Installation; Unpacking The Device; Installing Options; Contents Of 2H258-17R Carton - Enterasys 2200 Installation & User Manual

Unpacking the Device

3.1 UNPACKING THE DEVICE
Unpack the device as follows:
1. Open the box and remove the packing material protecting the 2H258-17R.
2. Verify the contents of the carton as listed in
Table 3-1 Contents of 2H258-17R Carton
Item
2H258-17R
Antistatic Wrist Strap
Console Cable Kit
Rackmount Kit
Strain-Relief Bracket
Manual Accessory Kit
Power Cord
3. Remove the tape seal on the non-conductive bag to remove the 2H258-17R.
4. Perform a visual inspection of the device for any signs of physical damage. Contact Enterasys
Networks if there are any signs of damage. Refer to
3.2

INSTALLING OPTIONS

NOTE: Install any optional equipment before proceeding to
If the 2H258-17R is to be installed with an optional HSIM or VHSIM, refer to the user's guide of
that device for the installation instructions.
3-2

Installation

Table 3-1.
Quantity
1
1
1
1
1
1
2
Section 1.2 for details.
Section 3.3.