Lanview Leds - Enterasys 2200 Installation & User Manual

Using LANVIEW
Table 4-1 describes the LED indications and provides recommended actions as appropriate.
Refer to the HSIM or VHSIM user's guide for a description of the HSIM or VHSIM LED
indications.
NOTE: The terms flashing, blinking, and solid used in
Flashing indicates an LED is flashing randomly.
Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
Table 4-1 LANVIEW LEDs
LED Color
PWR Off
Green
Amber
4-2 Troubleshooting
State
Device electronics not
receiving power from
power supply(ies).
Functional. Power
supply(ies) operating
normally.
Indicates loss of power
supply redundancy.
Table 4-1
Recommended Action
1. Ensure that the power cords are plugged
in correctly and that there is power at the
power source.
2. Contact Enterasys Networks for
assistance.
None.
1. Ensure that the power cords are plugged
in correctly and that there is power at the
power source.
2. Contact Enterasys Networks for
assistance.
indicate the following: