Installing The Zds Ii-Z8 Encore!® Software - ZiLOG UM014605-0208 User Manual

Installing the ZDS II—Z8 Encore!
Follow the steps below to install the software tools:
1. Load the ZDS II—Z8 Encore! Flash MCU CD into the CD-ROM
Note:
Software versions used in the following illustrations are for reference
only. You may have an updated version.
2. Click Next to continue with the installation. The License Agreement
3. Select Yes to accept the agreement and proceed with the installation.
4. After selecting Yes, the Choose Destination Location screen
5. The Select Program Folder screen appears. Follow the on-screen
6. After selecting Next, the Installation Wizard completes the
7. When the installation is complete, another screen appears asking you
8. The following directory is installed on the host PC, assuming all
UM014605-0208
Z8 Encore!
drive of the host PC. The CD launches DemoShield automatically
and provides a menu to install the product and documentation. Select
INSTALL PRODUCTS followed by INSTALL ZDS II to display
the Installation Wizard.
appears.
appears. Follow the directions on the screen and choose whether to
install ZDS II in the default location or in some other folder. Click
Next
.
instructions and click Next
installation.
to register the product online at www.zilog.com. To register at a later
time the registration link to the internet site is provided in the ZDS II
Help menu.
installation settings remain at their defaults:
C:/Program Files/ZiLOG/ZDSII_Z8Encore!_F640X_<Ver-
sion>.
®
Flash Microcontroller Development Kit
®
Software
.
User Manual
Installation
8