Table of Contents
Advertisement
Using ZDS-II to Download and Debug a Project
Zilog Developer Studio II (ZDS II) Integrated Development Environment is a complete
standalone system that provides a state-of-the-art development environment. Based on
standard Windows user interfaces, ZDS II integrates a language-sensitive editor, project
manager, C-compiler, assembler, linker, librarian, and source-level symbolic debugger to
provide a development solution specifically tailored to the Z8 Encore! Family of micro-
controllers.
1. Download and install ZDS II using the procedure outlined in
Developer Studio
2. If not already installed, install the VCOM USB driver included with the
ZMOTIONL300ZCOG_1.0 installation file by right-clicking on the .exe file and
selecting
–
–
–
Connecting the ZMOTIONL300 Development Board to your PC
Observe the following procedure to connect the ZMOTIONL300 Development Board to
your PC. We will use the ZM_NP_Command project for this example.
Disconnect or turn off the power to the ZMOTIONL300 Development Board before
Caution:
connecting or disconnecting the USB SmartCable.
1. Ensure that the NP Current Jumper is installed on J9. It should be installed across the
centre two pins, as shown in Figure 12.
UM028901-0318
II.
Run as administrator
Zilog_VCOM_Install.x64.exe: 64-bit Windows
Zilog_VCOM_Install.x86.exe: 32-bit Windows
The Device Driver will be installed as (Zilog USB Serial Device) in Device Man-
ager under Ports (COM & LPT)
®
Z8F6481 ZMOTION
. This driver is located in the Drivers folder.
Using ZDS-II to Download and Debug a Project
Library Development Kit
User Manual
Appendix B. IDE- Zilog
17
Advertisement
Table of Contents
