Getting Started; Using Zds Ii - ZiLOG UM014605-0208 User Manual

Getting Started

Using ZDS II

Follow the steps below to open an existing project:
1. Connect the Evaluation board to the host PC's serial communications
2. Apply 9 V DC power to the Evaluation board.
3. Run the ZDS II Software (
4. Select Open Project from the File menu. The Open Project dialog
5. Select samples. The samples folder appears.
6. Select the
7. Select the
8. Click Rebuild All and then the Reset icon
9. Click Go icon
For more information, refer to Zilog Developer Studio II—Z8 Encore®
User Manual (UM0130), supplied with the documentation on the CD-
ROM or available for download at www.zilog.com.
UM014605-0208
Z8 Encore!
port using the Smart Cable.
Encore! F640x_<Version>ZDS II-28 Encore!
F640x_<Version>
box appears.
Z8F640x_ledBlink
access the
ledBlink.pro
ledblink.pro
opens.
connect and download the code to the Evaluation board.
®
Flash Microcontroller Development Kit
>
Start Programs
).
folder and then the src folder to
project file.
file. The initial ZDS II program screen
to start the program.
User Manual
> -
ZDS II Z8
to
Installation
9