3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual page 70

Basic and Logging Parameters
Table 17
INI File Field Name
*
GUI Parameter Name
SysLogServerIP
(Network Settings/SysLog
Server IP Address)
EnableSyslog
(Network Settings/Enable
SysLog)
DisableRS232
LoggerFormat
DisableWebTask
ResetWebPassword
Disable WebConfig
SNMPManagerIP
(Network Settings/SNMP
Manager IP)
DisableSNMP
(Network/Settings/Enable
SNMP)
HTTPport
70
Valid Range and Description
IP address in dotted format notation, for example, 192.10.1.255
0 = Disable SysLog (default)
1 = Enable SysLog
If SysLog is disabled all Logs and error messages are sent to RS-232
serial port if DisableRS232 = 0
0 – RS-232 serial port is enabled (default)
1 – RS-232 serial port is disabled
To enable sending of all log and error messages to the RS-232 serial
port, define EnableSyslog = 0 and DisableRS232 = 0.
0 = name + msg
1 = time + msg
2 = name + time + msg
3 = SysLog prefix + msg (default)
0 = Enable Web management (default)
1 = Disable Web management
Allows resetting to default of Web password to:
Username: Admin
Password: Admin
0 = Enable changing parameters from Web (default)
1 = Operate Web server in read only mode
IP address of SNMP Manager. The SNMP manager is used for
receiving SNMP Traps.
For example: SNMPManagerIP = 10.2.1.10
0 = SNMP is enabled (default)
1 = SNMP is disabled
HTTP port used for Web management (default = 80)
3Com VCX V7111 VoIP SIP Gateways User Manual