Rack Mounting Installation; Desktop Mounting Installation - 3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual

Rack Mounting Installation

Rack Mounting
Figure 6
The VCX V7111 is installed into a standard 19-inch rack by the addition of the two brackets
supplied.
To install the VCX V7111, follow these steps:
Fasten the short bracket to the right-hand side of the Gateway using the two screws
1
provided, as shown in
ventilation hole in the side of the VCX V7111 box.
Fasten the long bracket to the left-hand side of the Gateway using the two screws
2
provided as shown in
ventilation hole in the side of the VCX V7111 box.
Insert the Gateway into the 19-inch rack and fasten the left-hand and right-hand brackets
3
to the vertical tracks of the 19-inch rack, using standard 19-inch rack bolts (not provided).
To connect the cables, see

Desktop Mounting Installation

VCX V7111 Desktop or Shelf
Figure 7
20
Figure 6, and carefully positioning the peg into a convenient
Figure 6, and carefully positioning the peg into a convenient
"Cable Connections" on page 21.
3Com VCX V7111 VoIP SIP Gateways User Manual