3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual page 39

For quick VCX V7111 setup, follow these steps:
Power-up the Gateway; after self-testing, in about 20 seconds the Ready LED on the
1
front panel turns to green. Any malfunction changes the Ready LED to red.
Before using your web browser to access the Gateway's Embedded Web Server, change
2
your PC's IP address and subnet mask to correspond with the VCX v7111 factory default
IP address and subnet mask.
Open any standard web-browsing application, such as Microsoft Internet Explorer
3
(Version. 5.0 and higher) or Netscape Navigator (Version. 7.0 and higher), and specify
the IP address of the Gateway in the Address field (for example, http://10.1.10.10 for
FXS); the Embedded Web Server Enter Network Password screen appears,
Web Browser Screen
Figure 18
Enter the user name and password (default: Admin, Admin). Note that the User Name
4
and Password fields are case-sensitive. Click OK; the Quick Setup screen is accessed.
In the Quick Setup screen, complete the Gateway's new IP address, NAT IP Address,
5
Subnet Mask, and Default Gateway IP Address fields.
Set the basic SIP Gateway Parameters, as shown in
3Com VCX V7111 VoIP SIP Gateways User Manual
Figure 19.
Figure 18.
39