Logging Screen; Preferences Window; Client Configuration Window - 3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual

To install the BootP/TFTP Configuration Utility, unzip the TP3.810.exe file and navigate to
the BootP *.exe file. The installation procedure is facilitated by prompts. After completing the
procedure, open Start>Programs>BootP; the BootP/TFTP Server main screen is displayed.

Logging Screen

The 3Com BootP/TFTP Configuration Utility main screen
the Log line, printed per BootP request with the following parameters:
Hardware (MAC) address
Status (found or not found in cache)
Date and Time
Assigned IP address (if found)
Client name
Clicking Log line shows all BootP reply parameters or enables entry to a new entity.

Preferences Window

The Preferences Window
configuration parameters:
TFTP directory
INI File Mask
Boot File Mask
TFTP timeout and number of retransmissions
BootP replay type (broadcast or unicast)
BootP ARP mode (dynamic or static)
Number of initiated BootP replies (send after remote reset), optionally used when the
Gateway (2FXS, 4FXS, 4FXO, 8FXS, 8FXO, or 24FXS), is installed behind the firewall
that blocks BootP broadcast requests.

Client Configuration Window

The Client Configuration Window
All client entities
MAC
Name
IP per entity
3Com VCX V7111 VoIP SIP Gateways User Manual
(Figure 62 on page 143) is used to define BootP and TFTP
(Figure 63 on page 144) shows:
(Figure 61 on page 141) includes
139