Loading Configuration Files; The Ini File Structure - 3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual

Loading Configuration Files

You can use the INI file to specify Call Progress Tone table files and Line Characteristics
control file to be downloaded to the VCX V7111 during the configuration phase, either
directly from the web browser or by using the TFTP procedure. It is also possible to define
whether the downloaded files are stored in non-volatile memory so the TFTP process is not
required every time the Gateway boots up.
The following INI file fields are related to this operation:
CallProgressTonesFilename – The name (and path) of the file containing the call
progress tones definition. See
Download Procedure" on page 99 for additional information on how to create and
download this file.
FXSCoefFileName – The name (and path) of the file providing the FXS line
characteristic parameters.
FXOCoefFileName – The name (and path) of the file providing the FXO line
characteristic parameters.
BurnCallProgressTonesFile – Stores the call progress tones configuration file in non-
volatile memory, if set to 1.
BurnCoefFile – Stores the line characteristics file in non-volatile memory, if set to 1.

The INI File Structure

The INI file can contain any number of parameters. The parameters are divided into groups
by their functionality. The general form of the INI file is shown in the following figure.
INI File Structure
Figure 29
[Sub Section Name]
Parameter_Name = Parameter_Value
Parameter_Name = Parameter_Value
.
..
; REMARK
[Sub Section Name]
88
"Call Progress Tone and Ringing Generation and
3Com VCX V7111 VoIP SIP Gateways User Manual