3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual page 117

For example, number 035000 is changed to 972035000, number 1001876 is changed to
5876 and number 1234510012001 is changed to 82001.
Set Up Gateway Endpoints' Phone Numbers
Endpoints' Phone Numbers table allocates phone numbers to Gateway ports, and to
enable/disable Gateway ports. The table defines phone numbers for Gateway endpoints.
The endpoints that are not defined are disabled.
In Channel(s) field a range of endpoints can be entered, such as from 1 through 8 for the
8FXS or 8FXO or from 1 through 24 for the 24FXS. For a single endpoint, a single number
can be entered in the channel(s) field.
Hunt Group ID can optionally be configured to define a group of channels that will be used
for routing IP Tel calls with common rules. Figure 51 shows the Endpoints' Phone Number
table.
Endpoint's Phone Number Table
Figure 51
Set Up Automatic Dialing Table
Automatic Dialing table defines destination numbers for Tel IP calls. It can be used if
Automatic Dialing feature is enabled (IsDialNeeded = 1). The table is applicable for FXS and
FXO analog Gateways, for outgoing, Tel IP calls. The table contains pre-configured
phone numbers per Gateway port. The number is automatically dialed if phone is picked up
(for FXS Gateway) or ring signal is applied to FXO Gateway port, see Figure 52.
3Com VCX V7111 VoIP SIP Gateways User Manual 117