Chapter 6: Provisioning; Provisioning For Sip Operation - 3Com V7111 - VCX 4 Channels Analog FXO Media Gateway User Manual

C 6: P
HAPTER
All VCX V7111 Gateways have similar functionality except for the number of
channels (the VCX V7111 24 FXS and 2FXS support only FXS), and all versions
are referred to collectively in this document as the VCX V7111.
VCX V7111 FXS refers only to the 24FXS, 8FXS, 4FXS, and 2FXS Gateways.
VCX V7111 FXO refers only to 8FXO and 4FXO Gateways.

Provisioning for SIP Operation

Initial configuration of the VCX V7111 is provided through a web browser or by loading of the
mp108.ini configuration file. The configuration INI file can be downloaded with a web browser
using HTTP or TFTP protocols or by using the 3Com configuration utility. The INI file name is
provided in the field Boot File Name of the BootP server.
To create an INI file, it is recommended to use the Excel utility provided. To use the Excel
utility, first install the Microsoft Office 2000 Excel application.
The INI file contains the following information:
Basic and Logging Parameters shown in
Channel Parameters shown in
SIP parameters shown in
Names for optional Call Progress Tone file. For detailed information, see
Progress Tones and
Name for optional Telephony Interface (Coeff.dat) Configuration file. For the VCX V7111
FXS and VCX V7111 FXO two different files should be used. See
Configuration File" on page 101 for more details.
The names of Call Progress and Coeff.dat files in INI file must be enclosed in
quotation marks ('...').
All INI file data is downloaded at startup and stored in non-volatile memory. The provisioning
procedure should be used again only to modify VCX V7111 parameters; otherwise, BootP
and TFTP is not needed again.
The Default Channel Parameters are applied to all VCX V7111 channels.
3Com VCX V7111 VoIP SIP Gateways User Manual
ROVISIONING
Table 17
Table 18 on page 71.
Table 19 on page 76).
Ringing" on page 93.
on page 68.
"The coeff.dat
"Using Call
67