A.6.6 Setup Modem & Pagers - Emerson Autochangeover Controllers AC8 User Manual

A.6.6 Setup Modem & Pagers
For details on this topic, see 7.8 - Setup System - Setup Modem & Pagers.
Pager Setup
For details on this feature, see 7.8.3 - Pager Setup - Pager Number and PIN and 7.8.4 - Pager
Setup - Communications Check (Service Terminal Interface only).
Setup Modem & Pagers - Pager Setup
SETUP MODEM&PAGERS
Input pager and
modem information
Select pager or modem
1=PAGER NUMBER 1
2=PAGER NUMBER 2
3=PAGER NUMBER 3
4=PAGER NUMBER 4
5=MODEM CONFIGURATION
6=RETURN TO SETUP MENU
7=RETURN TO MAIN MENU
SELECT A NUMBER:1
>ENTER PAGER NUMBER(40 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
>ENTER PAGER PIN NUMBER (20 CHARACTERS MAX).
>[]
>[
>COMMAND SUCCESSFUL
>ENABLE COMMUNICATIONS CHECK-YES(Y) OR NO(N)? (Service Terminal Interface only)
>[N]
>[
>COMMAND SUCCESSFUL
>ENTER TIME TO PERFORM COMMUNICATIONS CHECK(HH:MM). (Service Terminal Interface only)
>[00:00]
>[
>COMMAND SUCCESSFUL
CURRENT NUMBER
100
Setup Menu
*******************
An "A" is required
as 1st character
for an alpha pager,
an "N" for a numeric
pager, and an "M"
for a remote modem.
*******************