Date And Time; Information Display; Network Settings - Panasonic KX-UT113 Operating Instructions Manual

Customizing the Telephone

Date and Time

Setting
Date and Time
*1 Pressing [#] switches the date format.
*2 If the time format is not assigned in the configuration data, you can change the time format (12-hour or 24-hour) by pressing [*].
If the time format is set to 12-hour time in the configuration data, you can change the AM/PM setting by pressing [*].
Note
•
Daylight-saving time can be set through Web user interface programming. For details, consult your
administrator or dealer.

Information Display

Setting
Information Display

Network Settings

IMPORTANT
We recommend configuring these settings with your administrator or dealer. Network settings can also be
configured through Web user interface programming (Page 55). Contact your administrator or dealer for
further information.
42 Operating Instructions
Description
Set the date and time.
Description
View a variety of information about
the unit. Press [ ] and [ ] to display
the various settings. The following
settings can be viewed:
•
Registration status to the SIP
server
•
IP address
•
Subnet mask address
•
Default gateway address
•
IP address of the DNS server 1
•
IP address of the DNS server 2
•
ACS status
•
Display lock status
•
Firmware version
•
MAC address
Value Range
Date : dd/mm/yy or
*1
mm/dd/yy
Time : 00:00–23:59
*2
or 12:00–11:59 AM/
PM
Value Range
—
Document Version 2011-06
Default
—
Default
—