4.7.1.1 Firmware Maintenance
Enable Firmware Update
Description
Value Range
Default Value
Configuration File Reference
Update Type
Description
Value Range
Default Value
Configuration File Reference
Firmware File URL
Description
Value Range
Default Value
Document Version
2011-06
Selects whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
•
Changing this setting may require restarting the unit.
•
Local firmware updates from the Web user interface (® see
4.7.2 Local Firmware Update) can be performed regardless
of this setting.
•
Firmware updates using TR-069 can be performed regardless
of this setting.
•
Yes
•
No
Yes
FIRM_UPGRADE_ENABLE (Page 157)
Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
•
Automatic
•
Manual
Automatic
FIRM_UPGRADE_AUTO (Page 158)
Specifies the URL where the firmware file is stored.
Note
•
This setting is available only when [Enable Firmware
Update] is set to [Yes].
•
Changing this setting may require restarting the unit.
Max. 500 characters
Not stored.
4.7.1 Firmware Maintenance
Administrator Guide
129