4.6.2 Call Control [Line 1]
Enable Call Forwarding No Answer
Description
Value Range
Default Value
Forwarding Number (No Answer)
Description
Value Range
Default Value
Ring Counts (No Answer)
Description
Value Range
Default Value
Enable Shared Call
Description
Value Range
Default Value
Configuration File Reference
126
Administrator Guide
Selects whether to forward incoming calls to a specified destination
when a call is not answered after it has rung a specified number of
times.
•
Yes
•
No
No
Specifies the phone number of the destination to forward calls to when
a call is not answered after it has rung a specified number of times.
Max. 32 characters
Not stored.
Specifies the number of times that an incoming call rings until the call
is forwarded.
0, 2–20
3
Selects whether to enable the Shared Call feature of the SIP server,
which is used to share one line among the units.
Note
•
Availability depends on your phone system.
•
Yes
•
No
Note
•
If you select [Yes], the SIP server will control the line by using
a shared-call signaling method. If you select [No], the SIP
server will control the line by using a standard signaling method.
No
SHARED_CALL_ENABLE_n (Page 261)
Document Version 2015-02