4.5.2.1 Phone Number
Phone Number
Description
Value Range
Default Value
Configuration File Reference
SIP URI
Description
Value Range
Default Value
Configuration File Reference
4.5.2.2 SIP Server
Registrar Server Address
Description
Value Range
Default Value
Configuration File Reference
Registrar Server Port
Description
Document Version
2011-06
Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
•
When registering using a user ID that is not a phone number,
you should use the [SIP URI] setting.
Max. 32 characters
Not stored.
PHONE_NUMBER_n (Page 212)
Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:conference@example.com".
Note
•
When registering using a user ID that is not a phone number,
you should use this setting.
•
In a SIP URI, the user part ("conference" in the example above)
can contain up to 63 characters, and the host part
("example.com" in the example above) can contain up to 127
characters.
Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Not stored.
SIP_URI_n (Page 212)
Specifies the IP address or FQDN of the SIP registrar server.
Max. 127 characters
Not stored.
SIP_RGSTR_ADDR_n (Page 215)
Specifies the port number to use for communication with the SIP
registrar server.
4.5.2 SIP Settings [Line 1]–[Line 4]
Administrator Guide
93