4.5.2 SIP Settings [Line 1]–[Line 2]
Value Range
Default Value
Configuration File Reference
Local SIP Port
Description
Value Range
Default Value
Configuration File Reference
SIP URI
Description
Value Range
Default Value
Configuration File Reference
T1 Timer
Description
Value Range
Default Value
Configuration File Reference
122
Administrator Guide
Max. 32 characters
_sips._tls.
SIP_TLS_SRV_PREFIX_n (Page 255)
Specifies the source port number used by the unit for SIP
communication.
1024–49151
5060 (for Line 1)
5070 (for Line 2)
SIP_SRC_PORT_n (Page 236)
Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com", "2405551111_1".
Note
•
When registering using a user ID that is not a phone number,
you should use this setting.
•
In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 316 characters.
Max. 384 characters
Not stored.
SIP_URI_n (Page 233)
Specifies the default interval, in milliseconds, between transmissions of
SIP messages.
•
250
•
500
•
1000
•
2000
•
4000
500
SIP_TIMER_T1_n (Page 239)
Document Version 2015-02