Powerstate Control - Smart Technologies SMART Board 600i3 Configuration And User's Manual

40 | CH A P T E R 5 – R E MO T E L Y M A N A G IN G Y O U R SMA RT B O ARD 6 00 I3 O R
S B D 6 0 0 I 3 I NT E R A C T I V E W H I TE BO A R D S Y S T E M

Powerstate Control

The Powerstate control enables the projector to turn on or off and switch between
other related controls.
Command
on
off [off option]
get powerstate
NOTE
You must send the Off command twice. The first command displays an on-screen
message, and the second command shuts off the system. You must send the
second command within 10 seconds of the first command or it times out.
Field
off option
powerstate
Response
powerstate=[powerstate]
powerstate=[powerstate]
powerstate=[powerstate]
Possible Values
now
powering
on
cooling
confirm off
idle
Powered Off
yes
yes
yes
Description
This is an optional field, which
shuts down the projector
immediately. If Now isn't
specified, a dialog box
appears with the message,
"Press Power Button to
Turn off Projector."
A second Off command must
be sent within 10 seconds to
completely turn off the
projector or the projector
doesn't turn off.
Indicates the projector's
current powerstate
NOTE: Confirm Off is a
non-selectable powerstate
that is returned during stage
one of the two-button off
sequence.