Interactive Whiteboard Indicators And Controls - Smart Technologies SMART Board 600i3 Configuration And User's Manual

To resolve your unlit ready
light issue
49 | CH A P T E R 6 – TR O U B L E S H O O T I N G Y O U R S M ART BOARD 60 0I 3 OR SBD 600 I3
I N T E R A C T I V E W H I T E B O A RD S Y S T E M
1. Check the power source, and then make sure that all cables are connected.
2. Confirm that your projector is connected to an active power outlet.
3. Make sure that the pins on the connectors aren't broken or bent.
4. Make sure that the Hide Display feature on the remote is disabled.
5. If the previous steps don't resolve the issue, disconnect the power cord, and then
contact your authorized SMART
Interactive Whiteboard Indicators
and Controls
Your SMART Board 600 or SBD600 series interactive whiteboard includes the
following indicators and controls:
• A ready light LED
• Pen tray buttons, LEDs and sensors
• The controller module's reset button
The ready light LED is in the lower-right corner of your interactive whiteboard's frame.
The ready light indicates the operational state of the controller module. If your
interactive whiteboard behaves erratically or becomes unresponsive, or if the LED
displays colors other than green when it's on, try resetting the power by unplugging
the USB connection to your computer.
See the SMART Board 600 and SBD600 Series Interactive Whiteboard Installation
and User's Guide (document
see the Fast Track Troubleshooting flowcharts
SMART Technical Support
reseller.
1414) to resolve common issues. If the issues persist,
(document
website.
117615) on the