Replacing Your Uf55/Uf55W Projector Lamp; Replacing The Projector Lamp - Smart Technologies SMART Board 600i3 Configuration And User's Manual

Interactive whiteboard system
Table of Contents

Advertisement

Chapter 8
Replacing Your UF55/
UF55w Projector Lamp
This chapter has detailed instructions on how to replace your projector lamp.
Replacing the Projector Lamp ...................................................................... 57
Removing the Projector from the Boom ................................................. 59
Replacing the Projector Lamp Module ................................................... 61
Replacing the Projector .......................................................................... 63
Resetting the Lamp Timer ...................................................................... 64

Replacing the Projector Lamp

If a lamp fails, or if a replacement message appears on the UF55/UF55w projector's
screen, a qualified person can replace the projector lamp. Don't access the service
panel if you don't have a replacement lamp and instructions.
WARNING
Refer to the safety warnings and precautions published in the
UF55/UF55w Projector User's Guide
Do not attempt to service the projector other than performing routine lamp
replacement. Other than the lamp module, there are no user-serviceable parts
inside the unit.
This projector detects its own remaining lamp life. Replace the lamp when the
lamp life warning message appears. If you continue to use the projector after
the replacement message appears, the lamp might shatter or burst, scattering
glass throughout the projector head.
(document
133564).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sbd600i3Sbd600 seriesUf55Uf55wSmart board 600 series

Table of Contents