Smart Technologies SMART Board 600i3 Configuration And User's Manual page 23

11 | CH A P T E R 2 – I NSTAL LI NG YOUR S MAR T BOAR D 60 0I3 OR SB D6 00I 3
I N T E R A C T I V E W H I T E B O A RD S Y S T E M
Environmental
Requirement
Operating temperature • 41°F to 95°F (5°C to 35°C)
Storage temperature
Humidity
Water and fluid
resistance
Dust
Electrostatic discharge
(ESD)
Cables
Conducted and
radiated emissions
Parameter
from 0' to 6000' (0 m to 1829 m)
• 41°F to 86°F (5°C to 30°C)
from 6000' to 9800' (1829 m to 2987 m)
-40°F to 122°F (-40°C to 50°C)
• 30 to 70% relative humidity, non-condensing
• Humidity above 80% might cause slight wrinkling
in the screen surface sheet. The wrinkles disappear
when the humidity lowers.
• Intended for indoor use only. Doesn't meet any
salt-spray or water ingress requirements.
• Don't pour or spray liquids directly onto your interactive
whiteboard, the UF55/UF55w projector or any of its
sub-components. See page 52 for detailed instructions
on cleaning your interactive whiteboard system.
• Intended for use in office and classroom environments.
Not for industrial use where heavy dust and pollutants
can cause malfunctions or impaired operation.
• Designed for pollution degree 1 (P1) as per EN61558-1,
which is defined as "No pollution or only dry
non-conductive pollution".
• EN61000-4-2 severity level 4 for direct and indirect ESD
• No malfunction or damage up to 8kV (both polarities)
with a 330 ohm, 150 pF probe (air discharge)
• Unmated connectors meet no malfunction or damage up
to 4kV (both polarities) for direct (contact) discharge
All SMART Board 600i3 or SBD600i3 interactive whiteboard
system cables should be shielded to prevent potential
accidents and degraded video and audio quality.
EN55022/CISPR 22, Class A