Smart Technologies SMART Board 600i3 Configuration And User's Manual page 74

62 | CH A P T E R 8 – R E P L A C I NG Y O U R U F 5 5 / U F 5 5 W P R O J E C T O R L A M P
5. Pull up on the lamp module's handle, and then remove the lamp.
IMPORTANT
Recycle or dispose of the lamp module according to your local
waste authority.
6. Remove the replacement lamp module's packaging.
CAUTION
Do not touch any part of the lamp module except the housing.
7. Place the replacement lamp in the lamp slot, push the lamp all the way down,
and then tighten the lamp locking screws until they're secure.
8. Replace the outer lamp cover in its original position.