Smart Technologies SMART Board 600i3 Configuration And User's Manual page 44

32 | CH A P T E R 4 – U S I NG Y O U R S M A R T B O A R D 6 00 I3 O R S B D 6 0 0 I 3 I NT E R A C T I V E
WH ITE BOARD S YS T E M
Menu
Settings
Heading
Image H-position
Adjustment,
cont'd.
V-position
Saturation
Sharpness
Tint
White
Peaking
Degamma
Color
Audio Volume
Control
Mute,
Disable
Volume
Control and
Closed
Captioning
Closed
Captioning
Language
Description
Adjusts the horizontal position of the projected image
from 0 to 100
NOTE: Don't adjust this option unless a certified
SMART Technical Support Specialist
You can apply these settings only after all other
changes to the boom are made. This option applies to
VGA inputs only.
Adjusts the vertical position of the projected image
from -5 to 5
NOTE: Don't adjust this option unless a certified
SMART Technical Support Specialist
You can apply these settings only after all other
changes to the boom are made. This option applies to
VGA inputs only.
Adjusts the image from black and white to saturated
color from 0 to 100. This option applies to S-video
and composite inputs only.
Adjusts projector contrast, from 0 to 31. This option
applies to the S-video and composite inputs only.
Adjusts the image color balance of red and green
from 0 to 100. This option applies to the S-video and
composite inputs only.
Adjusts the image color brightness from 0 to 10
Adjusts the color performance of the display from
0 to 3
Adjusts your individual color settings
Increases and decreases volume from -20 to 20
Turns these features On or Off
Adjusts the closed captioning language to CC1
language or CC2 language
advises you to.
advises you to.