Ecp And Cable - Smart Technologies SMART Board 600i3 Configuration And User's Manual

4 | CH A P T E R 1 – A B O U T Y O U R S M A RT B O A R D 6 0 0I3 OR SBD 60 0I3 IN TE RAC T IVE
WH ITE BOARD S YS T E M
• Protected cable routing through the projector housing and a cable cover
to prevent tampering and clutter
• A secure mounting and installation system that includes:
– A projector padlock loop
– Mounting hardware for solid masonry or framed wall installations
– Templates and instructions for positioning the system in a safe manner

ECP and Cable

Your interactive whiteboard system's ECP features connectors for three inputs and
control for four inputs, including the direct HD-DB15 RGB connection to the projector.
Direct inputs supported include:
• A single HD-DB15 (RGB) input connector and
associated audio (3.5 mm jack) for RGB or
component video and HDTV sources
(YPbPr/YCbCr with proper adaptors, not included)
• An S-video (4-pin mini-DIN) and associated audio
(two RCA jacks)
• A composite video (RCA jack) and associated audio (two RCA jacks)
NOTE
A specialized harness cable provided by SMART enables output to the projector.