Smart Technologies SMART Board 600i3 Configuration And User's Manual page 37

25 | CH A P T E R 3 – C O N N E C T I N G Y O U R S M A R T BOAR D 60 0I 3 OR S BD6 00 I3
I N T E R A C T I V E W H I T E B O A RD S Y S T E M
4. Connect the ECP cables to the projector by connecting each section separately.
– Connect the S-Video and two Audio cables to the receptacles in section A.
– Connect the Video and two Audio cables to the receptacles in section B.
– Connect the Audio 2 and Computer 2 VGA cables to the receptacles
in section C.
– Connect the ECP DB-9 Control cable in section D.
5. Connect the VESA RGB (VGA) connector and the DB-25 connector from the
harness cable to the ECP.
DB-25
Connector
B C
A
Audio In Audio In Audio 2 Audio 1 Audio Out
S-video Video Computer (VGA) 2 Computer (VGA) 1
B
A
VGA Connector
D
Service Control
VGA Out
C D