Recording; Recording With The Built-In Microphone; Recording With An External Microphone; Microphone 6 - Philips LFH7655 - Digital Voice Tracer 7655 64 MB Recorder User Manual

Digital voice tracer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Record
C Note: For good results, when working with Dragon speech
recognition software, record in HQ mode (factory default) and
convert the .zvr file into .wav format after PC download! Please also
read the Download Manager software user manual.
Note the following before recording is begun (Be sure the device is
in standby mode):
Press the FOLDER/REPEAT button to select the desired folder.
The Voice Tracer will move to the next folder (A, B, C, or D) each
time the button is pressed. If a folder is not selected, the Voice
Tracer will record in the current folder.
When the number of files in the current folder reaches 99, the
recording will continue after the last file of the next folder.
Press the PLAY/PAUSE/REMAIN button to display the remaining
recording capacity.
Press the NEXT button  to separate a FILE while recording (file
separation function).
The maximum number of files in each folder is 99 or up to 396 files.
If the recording time exceeds the available capacity or
the file number reaches 396, "FULL" is displayed and
recording cannot continue
some recordings or move them to an external device
(audio or PC) to continue recording.

1
. If this happens, delete
Do not remove the batteries during recording. This may cause the
Voice Tracer to malfunction. If recording for a prolonged period of
time, replace the batteries before beginning recording.
Recording will stop automatically when no sound is detected when
the Voice Tracer is in VA mode. Deactivate the VA function when
recording important conversations.
3.1
Record With the Built-in Microphone
Set the desired recording folder, VA function and
1
quality (HQ, SP or LP) before recording (see chapter
"Menu").
Point the device's built-in microphone toward the
2
sound source.
Press the REC/PAUSE button to start recording. The
3
red LED will light
1
4
Press the REC/PAUSE button to pause the recording
3
.
Press the REC/PAUSE button again to continue the
5
recording. The red LED will light again.
Press the STOP/DEL button to stop recording.
6
3.2
Record With an External Microphone
1
To record with an external microphone, connect the microphone
to the microphone socket and follow the same procedure as for the
built-in microphone.
2
.
1
2
3
User manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents