Recording; Record A File; Edit A File - Philips VoiceTracer DVT2110 User Manual

4. Recording

Record a file

NOTE
• Be careful not to cover the microphones while
recording. This might result in a lower recording
quality.
• If the recording time of your current recording
exceeds the available storage capacity, the re-
cording will stop. In this case, delete files from
your device to make more storage available.
Before you start recording
• Make sure your device has enough battery power left.
When your battery is almost discharged, you will see a
battery low icon .
X The device will turn off and your current recording will
automatically be saved.
• First select the folder you want your recording to be
saved in. For more information, see
ing [9]. You can store 100 files in each of the folders A,
B, C, and D.
If one of the folders is full, your subsequent recordings
will automatically be stored in the next folder.
• We recommend that you make a test recording in order
to find the most suitable presets for your recording and
achieve the best recording results.
Start a new recording
1. In stop mode, press the Left function button
a new recording.
X The new file mode screen is displayed.
2. Press the Right function button to open the settings
panel .
To select a folder for your recording to be saved in:
• Press the Up/Down buttons to navigate to Folder and
then press the Record button to confirm your selec-
tion.
• Press the Up/Down buttons to navigate to the folder
you want your new recording to be saved in and then
press the Record button to confirm your selection.
• To return to the stop mode screen, press the Back
button.
To adjust the settings for your recording:
• Press the Up/Down buttons to navigate to your de-
sired setting and then press the Record button to
confirm your selection.
• To return to the stop mode screen, press the Back
button.
3. Press the Record button to start recording.
X The recording screen is displayed.
Start a new record-
to start
X The Record/Status LED illuminates red.
4. Press the Record button again to stop recording.
X The recording is saved to the preselected folder.

Edit a file

You can edit existing recordings in stop mode by appending
or overwriting a recording.
Append: Add additional recording parts at the end of an
existing recording.
Overwrite: Overwrite an existing recording part starting
from any point within the recording.
To append a recording part:
In stop mode of an existing file, press the Record button.
• If the cursor of the audio progress bar is at the end of the
recording:
X The recording screen is displayed and a new recording
part is added at the end of your file.
• If the cursor of the audio progress bar is at the beginning
of the recording:
X The editing panel opens.
X Press the Up/Down buttons to select Append and then
press the Record button to confirm your selection.
X The recording screen is displayed and a new recording
part is added at the end of your file.
To overwrite a recording part:
1. In playback mode, press the Play/Stop button to stop
playback at your desired part.
2. Press the Record button.
X The editing panel opens.
3. Press the Up/Down buttons to select Overwrite and
then press the Record button to confirm your selection.
X The recording screen is displayed and a new record-
ing starts from where you stopped playback.
TIP
If you always want to either append or overwrite
a recording part and don't want the editing panel
to open each time, press the Right function but-
ton to open the settings panel
button to navigate to Edit mode and then select
Append or Overwrite.
. Press the Down
9