Signal Ratings - Hitachi L200 Series Instruction Manual

Item
Other functions
Protective function
Operat- Temperature
ing
Humidity
Environ
ment
Vibration *12
Location
Coating color
Options

Signal Ratings

Detailed ratings are in
Signal / Contact
Built-in power for inputs
Discrete logic inputs
Discrete logic outputs
Analog output
Analog input, current
Analog input, voltage
+10V analog reference
Alarm relay contacts
AVR function, curved accel/decel profile, upper and lower limiters,
16-stage speed profile, fine adjustment of start frequency, carrier
frequency change (2 to 14 kHz) *10, frequency jump, gain and bias
setting, process jogging, electronic thermal level adjustment, retry
function, trip history monitor, 2nd setting selection, fan ON/OFF
selection
Over-current, over-voltage, under-voltage, overload, extreme high/
low temperature, CPU error, memory error, ground fault detection at
startup, internal communication error, electronic thermal
Operating (ambient): -10 to 40°C (*10) / Storage: -25 to 70°C (*11)
20 to 90% humidity (non-condensing)
2
5.9 m/s (0.6G), 10 to 55 Hz
Altitude 1,000 m or less, indoors (no corrosive gasses or dust)
Blue (DIC 14 Version No. 436)
Remote operator unit, copy unit, cables for the units, braking unit,
braking resistor, AC reactor, DC reactor, noise filter, DIN rail
mounting
"Control Logic Signal Specifications" on page
24VDC, 30 mA maximum
27VDC maximum
50mA maximum ON state current, 27 VDC maximum OFF state voltage
0 to 10VDC, 1 mA
4 to 19.6 mA range, 20 mA nominal
0 to 9.6 VDC range, 10VDC nominal, input impedance 10 kΩ
10VDC nominal, 10 mA maximum
250 VAC, 2.5A (R load) max., 0.2A (I load, P.F.=0.4) max.
100 VAC, 10mA min.
30 VDC, 3.0A (R load) max., 0.7A (I load, P.F.=0.4) max.
5 VDC, 100mA min.
L200 Inverter
General Specifications
Ratings
1–11
4–6.