Configuring The Network Boot Protocol - EUROCOM 5600D Monte Carlo User Manual

Configuring the Network Boot Protocol

1
Realtek RTK8139(A/B/C)/RTL8130 Boot Agent
Press Shift-F10 to configure .........
2
Network Boot Protocol
Boot Order
Show Config Message
Show Message Time
Network boot disabled, boot local devices
<Esc>
Quit
After enabling the network boot option from the Advanced menu (see
Oprom:(Advanced Menu>Intel Developed Advanced Menu)" on page 5 -
12) you may configure the settings at startup. When you see the message pic-
tured , press and hold the Shift and F10 keys to get to the Boot Agent Con-
1
figuration Menu . Save the settings to automatically boot from the network
2
at startup.
Realtek RTL8139(A/B/C)/RTL8130 Boot Agent
Configuration Menu v2.11
PXE
PXE
ROM Disable
Enable
3 Seconds
<Space> <Enter> <F4>
Change Value Next Option Save/Quit
BIOS Utilities
Figure 5 - 5
Boot Agent Menu
Enabling Network
Boot
Go to the Intel Devel-
oped Advanced Menu.
Set the PXE Oprom
option to Enabled.
Save the changes and
exit.
At startup, press and
hold the Shift and F10
keys.
"PXE
Configure the network
protocol.
Save the settings to
automatically
from the network.
Advanced Menu 5 - 13
5
boot