Configuring The Network Boot Protocol - EUROCOM Notebook User Manual

BIOS Utilities
Figure 5 - 6
Boot Agent Menu
Enabling Network
Boot
5
Go to the Advanced >
Advanced
Control menu to en-
able the Giga LAN
PXE OPROM option.
Save the changes and
exit.
At startup, press and
hold the Shift and F10
keys.
Configure the network
protocol.
Save the settings to
automatically
from the network.
5 - 14 Boot Menu

Configuring the Network Boot Protocol

1
2
Chipset
Enable the Giga LAN PXE OPROM option from the Advanced >Advanced
Chipset Control menu, and then configure the settings at startup. When you
boot see the message pictured
the Boot Agent Configuration Menu
boot from the network at startup.
Realtek RTL8110S/8169S Gigabit Boot Agent
Press Shift-F10 to configure .........
Realtek RTL8110S/8169S Gigabit Boot Agent
Configuration Menu v1.50
Network Boot Protocol
Boot Order
Show Config Message
Show Message Time
Boot ordered by BBS BIOS, if BBS BIOS present
<Esc> <Space>
Quit Change Value
, press and hold the Shift and F10 keys to get to
1
. Save the settings to automatically
2
PXE
PXE
PnP/BEV(BBS)
Enable
3 Seconds
<Enter> <F4>
Next Option Save/Quit