EPSON Stylus Pro 9000
4.2.1 Removing the Housing
This sections describes the removal procedure for printer housing parts. See
below for an illustration of the housing parts.
Roll Cover
H Top Cover
L Side Cover
Front Cover
Figure 4-2. Housing Part Diagram
Disassembly & Assembly
Upper Paper Guide
(behind H Top Cover)
R Side Cover
Maintenance
Cover
Lower Paper Guide
MAINTENANCE COVER REMOVAL
1. Open the Front Cover.
2. Remove 2 screws, CP(W2) M3x6, and then remove the Maintenance
Cover.
Figure 4-3. Maintenance Cover Removal
Disassembly Flow
CP(W2) M3x6 screw
Revision B
73