Replacing The Waste Ink Pads - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

REPLACING THE WASTE INK PADS

To keep the printhead clean and maintain quality, the printer drains waste ink
away from the printhead surface and nozzles into the Waste Ink Boxes. Once a
predetermined amount of waste ink has been drained into one of the Waste Ink
Boxes, the printer displays the "Maintenance Call 0100" or "Service Call
00000100" to indicate one of the boxes is full and needs to be replaced.
When the printer's useful life counter indicates the ink pads
need to be replaced, the following parts all need to be
replaced at the same time.
n
Waste Ink Pads, Left & Right
n
Pump Assembly
n
Cap Assembly
n
Head Cleaner
n
F Box, Left & Right
The above mentioned parts are also available as a Kit.
Description: MAINTENANCE KIT
Parts code: 1048434
Disassembly & Assembly
Left Waste
Ink Box
Figure 4-16. L/R Waste Ink Box Positions
1. Remove the Maintenance Cover as described in "Maintenance Cover
Removal" on page 73.
2. Remove the H Top Cover as described in "H Top Cover Removal" on
page 74.
3. Remove the L/R Side Covers as described in "L/R Side Covers Removal"
on page 75.
4. Remove the Front Cover Assembly as described in "Front Cover Assembly
Removal" on page 76.
5. Remove the Lower Paper Guide as described in "Lower Paper Guide
Removal" on page 78.
Disassembly Flow
Revision B
Right Waste
Ink Box
83