Cleaning Menu; Print Menu; Parameter Menu; Initialize" Items - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

5.2.6 Cleaning menu

Using this menu you can select a cleaning mode and initiate that cleaning
operation. Also you can select whether or not the printer performs the initial-
cleaning cycle as well as forcefully start the initial-cleaning cycle.
[Pause] returns you
to previous menu
[SelecType]
Cleaning: Std. KK0
Cleaning: Std. KK1
Cleaning: Std. KK2
Cleaning: Init. Fill
[Item]
o
Std. KK0 (CL1)
Normal cleaning cycle
o Std. KK1 (CL1')
Strong cleaning cycle
o Std. KK2 (CL2)
Strong cleaning cycle
o
Init. Fill

PRINT MENU

The Print menu performs the same test-printing functions as the "Test Print"
option on the Adjustment menu. For details, see "Test Pattern Print" on
page 129.
Adjustment
[Enter]
Start the
cleaning cycle
Volume of ink cleared = low
Volume of ink cleared = medium
rubbing = off
Volume of ink cleared = high
rubbing = on
Perform Initial charge sequence

5.2.7 Parameter menu

Using this menu you can reset or change the parameters for the printer
mechanism controls. However, the parameters on this menu can also be
modified from the Adjust menu. When servicing the printer, you do not need to
separately update or reset the parameters from this menu.
[Pause] to return to previous menu
[SelecType]
Parameter: Init.
Parameter: Update
[Item]

"INITIALIZE" ITEMS

The items you can reset (re-initialize) using this menu are described below.
o
Capping Position
o PF
o Serial No.
o Maintenance Record
Adjustment Steps
Revision B
[Enter]
Other
menus
[Pause]
137