Encoder; Fan; Elec - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

ENCODER

This function confirms the operation of the CR Motor and PF Motor encoders.
To check an encoder, follow the instructions below for the corresponding
encoder.
o CR encoder: Move the carriage left and right by hand
o
PF encoder: Turn the Grid Roller by hand
[Pause] returns you
to previous menu
[SelecType]
Encoder: CR
Encoder: PF
[Item]

FAN

This function confirms the operation of the paper vacuum fans. When this item
is selected, the fan turns on. Press the Pause button to turn the fan off and
proceed to the next item.
[Pause] returns you
to previous menu
Adjustment
XXXX
XXXX
Fan: Pause

ELEC.

This function allows you to check the operation-record information and the
fatal-error record stored in the control circuit. See the Error Message List for
Service Technicians table on page 58 for details on the error messages.
[Pause] returns you
to previous menu
[SelecType]
Record:Maintenance
[Item]
o
Record: Error menu
The errors listed here do not include CPU errors (service call errors), and
the printer lists a maximum of the most recent seven fatal errors, Error 0~6.
Adjustment Steps
[Enter]
[Pause]
Record:Error
[Pause] returns you
to previous menu
[SelecType]
Error0: XXXXXXXX
Error1: XXXXXXXX
[Item]
Lists up to seven errors
Revision B
Other
menus
135