Adj Input Rank - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

ADJ INPUT RANK

NOTE: Not necessary if you replace the Main Board but do not
replace the printheads.
This function allows you to enter the B head and C head ID's.
1. Make sure "Adj: Input Rank" appears on the LCD and press the Enter
button.
2. First enter the B head (K/C/M) ID. Press the Paper Feed + or Paper Feed -
button to select the ID value. After correctly entering the B head ID, press
the Enter button to begin entering the C head ID.
If an out-of-range error ("Error Rank Input") occurs, press the Enter button
and re-enter the ID.
3. After entering the head ID for both printheads, press the Enter button and
"Enter Key" appears on the LCD. Press the Enter button again to write the
printhead ID value to the Main Board and begin the initial-ink charge in the
heads.
After entering B & C head ID's, "Enter Key" appears on
the LCD. To avoid wasting ink, if you do not replace the
printheads, press the Pause button instead of the Enter
button to skip the initial-ink charge process.
Adjustment
"x" = B or C, for B head or C head
00000-x-ID1: AAAAAA
*
0 0000-x-ID1: AAAAAA
*
00 000-x-ID1: AAAAAA
*
000 00-x-ID1: AAAAAA
*
0000 0-x-ID1: AAAAAA
*
00000 -x-SUM: AAAAAA
*
Press the [Enter] button if an
input error (below) occurs.
Error Rank Input
Adjustment Steps
Revision B
Press Paper Feed [+] or
[-] to select the value.
When finished entering the C
head ID, press the [Enter] button.
Enter Key
[Enter]
Please Set Ink
Insert ink cartridges
Cleaning
118