Adj Bi-D - Epson Stylus Pro 9000 Service Manual

EPSON Stylus Pro 9000

ADJ BI-D

This function adjusts the Bi-D print position for both printheads. The printer
prints a test pattern in both directions (toward the HP and away from the
HP), and lines that do not line up vertically indicate the heads need Bi-D
adjustment. The Bi-D adjust items are shown in the table below.
Table 5-6. Bi-D Adjust Items
Item
BiD/200/N/B Bi-D adjustment/200cps/Normal-dot/B head
BiD/200/N/C Bi-D adjustment/200cps/Normal-dot/C head
BiD/200/M/B Bi-D adjustment/200cps/Micro-dot/B head
BiD/200/M/C Bi-D adjustment/200cps/Micro-dot/C head
BiD/300/N/B Bi-D adjustment/300cps/Normal-dot/B head
BiD/300/N/C Bi-D adjustment/300cps/Normal-dot/C head
BiD/300/M/B Bi-D adjustment/300cps/Micro-dot/B head
BiD/300/M/C Bi-D adjustment/300cps/Micro-dot/C head
Note: The number refers to the numbered pattern on the printed Bi-D test pattern.
1. Make sure "Bi-D" appears on the LCD, and press the Enter button.
2. After all the patterns print, "BiD, 200, N, B: xxx" appears in the LCD.
Adjustment
Description Number
Please Set Paper
Printing Pattern
1
BiD, XXX, Y, Z:
2
3
4
Based on the printed pattern, make sure each
numbered pattern is vertically aligned.
5
6
7
8 [SelecType]/[Item]
#1
#2
#3
#4
#5
#6
#7
#8
Figure 5-6. Bi-D Adjustment Test Pattern
Adjustment Steps
XXX="300" or "200"/
O
Y="N" or "M"
Z="B" or "C"
[Enter]
Bi-D End
Revision B
End
adjustment/
next menu
122