Printer Setting Mode (Stylus Color C80 Only); Default Setting Mode - Epson Stylus Color C70 Service Manual

EPSON Stylus COLOR C70/C80

1.4.5 Printer setting mode (Stylus COLOR C80 only)

When turning the printer on with pushing the Cleaning switch, the Paper Out LED
starts blinking. Then, to pushing the Load /Eject switch again while the Paper Out LED
is blinking, or no switch pushing while the Paper Out LED is blinking, the printer
enters the Default setting mode.
To pushing the Cleaning switch while the Paper Out LED is blinking, the printer enters
the Print head alignment mode.

1.4.5.1 Default setting mode

There are some parameters that can be changed by users and will be referred at the time
of initialization of the printer.
Setting method
(a)Press Load/Eject button.
The method of selecting language for 'Usage of this mode' is printed.
(b)Select language for 'Usage of this mode' by Cleaning button.
Paper Out LED, Ink Out LED and Power LED show the language for 'Usage of this
mode' that is currently selected. The selection will be advanced one by one as the
button is pressed and the On/Off/Blink of those three LEDs will also be changed
according to the selection.
(c)Press Load/Eject button.
The current setting and the 'Usage of this mode' by selected language will be printed
on the paper set in the paper path at that time.
(d)Select menu by Cleaning button.
Paper Out LED, Ink Out LED and Power LED show the menu which is selected at
that time. The selection will be advanced one by one as the button is pressed and the
combination of those three LEDs status of On/Off/Blink/2-Blinks will be changed
according to the selection.
(e)When Load/Eject button is pressed, Printer changes the indication to the setting value
of the selected menu.
Paper Out LED , Ink Out LED and Power LED show the current setting value.
(f)Select setting value by Load/Eject button.
Paper Out LED, Ink Out LED and Power LED show that menu's value by status of
On/Off/Blink/2-Blinks.
That value can be changed by pressing Load/Eject button and the LEDs status of On/
Off/Blink/2-Blinks will be changed as the button is pressed.
PRODUCT DESCRIPTION
(g)When Cleaning button is pressed, Printer memorize the setting value, and changes
the indication to the main menu.
Paper Out LED, Ink Out LED and Power LED show the current menu setting.
(h)Repeat (d) to (g)
The menu selection will return to the first menu after the last menu selection is over.
(i)Turn the printer off
The setting is stored into non-volatile memory.
Menu
Font
Print direction
Loading Position
Parallel I/F transfer rate
Auto line feed
0 slash
Pitch
Character tables
OPERATOR CONTROLS
Table 1-26. Setting Menu
Setting
Roman / Courier / Draft
Auto / Bi-D / Uni-D
3 mm / 8.5 mm / Others
Fast / Normal
Off / On
ø
10 cpi, 12 cpi, 15 cpi, 17 cpi, 20 cpi, Proportional
Italic USA, Italic France,
Italic Germany, Italic U.K,
Italic Denmark, Italic Sweden,
Italic Italy, Italic Spain,
PC 437, PC 437 Greek,
PC 850, PC 853,
PC 855, PC 852,
PC 857, PC 866,
PC 869, MAZOWIA,
Code MJK. ISO 8859-7,
ISO Latin 1T, Bulgaria,
PC 774, Estonia,
ISO 8859-2, PC 866 LAT,
PC 860, PC 861,
PC 865, PC 866 UKR,
PC AR864, PC APTEC,
PC 708, PC 720,
BRASCII, Abicomp,
ISO Latin1
Revision A
PC 858.
ISO 8859-15,
PC 863,
PC 861,
PC 771,
Roman 8
27