Epson Stylus Color C70 Service Manual page 109

EPSON Stylus COLOR C70/C80
Figure 4-19. ASF Mounting Plate Removal
5. Disconnect the connector (white 4-pin) from the Encoder Board Assembly.
6. Remove the screw (4) (CBS 3x8 {8±1 kgf.cm}) and the screw (2) (CBS 3x6 {8±1
kgf.cm}) that are securing the two Shield Plates to the Main Board Assembly (one
of the screws is securing two plates). Then remove the Shield Plate (Right).
C.B.S 3x6
[Right-Front side]
Figure 4-20. Shield Plate (Right) Removal
7. Disconnect the four connectors (CN12: white 4-pin, CN13: black 2-pin, CN14:
white 2-pin and CN15: white 8-pin) from the Man Board Assembly.
Disassembly and Assembly
2
1
ASF Mounting Plate
Shield Plate (Right)
8. Remove all Harnesses from the Harness Slots in the Left ASF Frame.
C.B.S 3x8
Disassembly
CN 8
CN 9
CN12 CN 13
CN 14 CN 19
Figure 4-21. Connectors Removal
Hook
Connector
Figure 4-22. Harness Removal
Revision A
109