Epson Stylus Color C70 Service Manual page 47

EPSON Stylus COLOR C70/C80
Step 4 : ASF Reset Operation
11. Once a loaded paper is completely printed and ejected, printer will perform the
ASF reset operation if the next printing data does not input for a few seconds. Note
that the printer will not perform the ASF reset operation if the printing data
st
continues transferring after a 1
details.
11-1.Stopping the Print Data for a few seconds
If the printer does not receive print data for a few seconds after ejecting a 1st
paper, "silence cam" will rotate to counter clockwise direction, and will soon
change its direction to clockwise direction to make the ASF return to its
stand-by condition shown No.1.
After completing this reset operation, user can install more enough papers
from the front side of the current installed papers. (maximum 150 sheets of
normal plain papers) Because the hopper status is in the same condition to
Step 1.
11-2.For the Continue Printing
In case the print data continues transferring from PC as soon as 1
ejected, LD roller will rotate to counter clockwise direction again and same
operation from Step 5 to Step 10 are performed until the print data is
completely printed.
Operating Principles
paper is printed and ejected. Following is its
st
paper is
Overview
Case of 11 - 2
1
2
Figure 2-20. Silence Cam mechanism (7)
Revision A
Case of 11 - 1
47