Epson Stylus Color C70 Service Manual page 145

EPSON Stylus COLOR C70/C80
4. Select "Printing the head angle pattern" and press "OK". Printer will start printing
with current head angle setting. During printing, following screen appears, and
status message changes after the printing.
Figure 5-10. "Head Angle" Printing Screen
5. Once the printing completes, the program screen changes as follows.
Figure 5-11. "Head Angle" Printing Screen
Adjustment
6. Now, you can see the following printing pattern. And printer is latching its printed
paper.
Head Angular
Figure 5-12. "Head Angle" Check Pattern
7. If you judge the once printer paper is OK pattern, select "No need to adjust", and
press "OK" button to return the program screen to the "Head angular" initial
screen, and to eject a printed paper. Then, you can advance to another adjustment.
On the other hands, if you judge it as NG (No Good) pattern, select "Adjusting the
head angle" on the program screen and press "OK" button. As soon as the carriage
moves to the left side just a little, it stops soon. And program screen changes as
follows:
Figure 5-13. Head Angle Adjust Mode 1
Adjustment
Revision A
145