Epson Stylus Color C70 Service Manual page 135

EPSON Stylus COLOR C70/C80
PF Scale Assembly
Spacer
CR Guide Shaft
Figure 4-81. Rotary Encoder Removal
Handle the Rotary Encoder carefully at all times while working in
order to prevent it from becoming broken or otherwise damaged.
When installing the CR Frame, check the following points.
Attach the three Torsion Springs which are installed to the
middle of the PF Frame to the Cutting Parts at the lower
middle part of the CR Frame.
Insert the nook of the CR Frame into the Cutting Parts at the
middle of the PF Frame.
Place the CR Frame onto the dowel at the rear-right of the PF
Frame.
Disassembly and Assembly
Figure 4-82. Rotary Encoder Installation (1)
Figure 4-83. Rotary Encoder Installation (2)
Disassembly
Cutting Parts
Rear-Center of
Printer Mechanism
Torsion Spring
Cutting Parts
Center of
Printer Mechanism
Revision A
135