Epson Stylus Color C70 Service Manual page 147

EPSON Stylus COLOR C70/C80
1. The ideal condition is that the upper lines and lower lines have to
be divided equally each other.
2. The actual operation for changing adjust-lever is quite complicate.
So, accede to each step for details.
1. Loosen a screw securing the head fixing plate in the left of the carriage unit by
o o
turning it 90 to 180 . (Be careful not to remove it completely.)
Figure 5-15. Location of the left side screw
2. Loosen a screw securing the head fixing plate in the right of the carriage unit by
o o
turning it 90 to 180 . (Be careful not to remove it completely.)
Figure 5-16. Location of the right side screw
Adjustment
A left side screw
A right side screw
3. Press "O.K." button on the current program screen (Figure 5-13). The screen
changes as follows.
Figure 5-17. Head Angle Adjust Mode 4
4. By referring Figure 5-14 mentioned relationship between adjust lever operation
and reaction of angle check pattern, decide your target direction and the location
for the head angle adjustment lever.
5. Once you decide your target lever position, accede to followings to change the
current adjust lever position to your target position.
Now imagine that head angle condition is in following condition. And you
want to change the lever position to more upper side. In this case, you have to
change it with acceding to step 1 to step 2 as shown below.
Adjustment
Revision A
147